VMware PowerCLI 101 - Part5 - Real time storage IOPS and latency

It is very important to monitor and analyze the performance of storage subsystem components as it direcly affects the application performance. In this article, I will briefly explain how to use PowerCLI to get real time storage IOPS and latency of the following: 

• Virtual disk
• Datastore
• Disk/ LUN 
• Storage adapter
• Storage path

Connect to vCenter server using:
Connect-VIServer <IP address of vCenter>

To understand the list of all available stats for a specific entity, you can use Get-StatType. For example, to list all real time stats for a virtual machine you can use:

Get-StatType -Entity <VM name> -Realtime | sort

Virtual disk

To get real-time IOPS and latency of all virtual disks of a VM named 'lustre01':
Get-Stat -Entity lustre01 -Realtime -MaxSamples 1 -Stat virtualDisk.numberReadAveraged.average,virtualDisk.numberWriteAveraged.average,virtualDisk.totalReadLatency.average,virtualDisk.totalWriteLatency.average | sort Instance,MetricId | select MetricId, Value, Unit, Instance

Datastore

To get real-time IOPS and latency of a datastore (with Uuid: 5bea72bb-5d72ed6a-1d85-246e96792988) from an ESXi host (IP: 192.168.105.10):

Get-Stat -Entity 192.168.105.10 -Stat datastore.numberReadAveraged.average,datastore.numberWriteAveraged.average,datastore.totalReadLatency.average,datastore.totalWriteLatency.average -Realtime -MaxSamples 1 -Instance 5bea72bb-5d72ed6a-1d85-246e96792988 | Select MetricId, Value, Unit, Instance | Sort-Object MetricId

Note: You can get Uuid of a datastore using (Get-Datastore vol01).ExtensionData.Info.Vmfs.Uuid

Refer my article "Real time VMware datastore performance monitoring using PowerShell" for monitoring the real time performance statistics of multiple shared VMFS datastores which are part of a multi-node VMware ESXi cluster.

Disk/ LUN

To get real-time IOPS and latency of a disk (eui.387de1af35b93f6ff0a9bef000000000): 

Get-Stat -Entity 192.168.105.10 -Disk -Realtime -Instance eui.387de1af35b93f6ff0a9bef000000000 -MaxSamples 1 -Stat disk.numberWriteAveraged.average,disk.numberReadAveraged.average,disk.totalWriteLatency.average,disk.totalReadLatency.average | Select MetricId, Value, Unit, Instance

Storage adapter

To get real-time IOPS and latency of a storage adapter: 

Get-Stat -Entity 192.168.105.10 -Realtime -MaxSamples 1 -Stat storageAdapter.totalReadLatency.average, storageAdapter.totalWriteLatency.average, storageAdapter.numberReadAveraged.average, storageAdapter.numberWriteAveraged.average -Instance vmhba64 | Select-Object MetricId, Value, Unit, Instance | Sort-Object MetricId

Storage Path

To get real-time IOPS and latency of a storage path:

Get-Stat -Entity 192.168.105.10 -Realtime -MaxSamples 1 -Stat storagePath.totalReadLatency.average, storagePath.totalWriteLatency.average, storagePath.numberReadAveraged.average, storagePath.numberWriteAveraged.average -Instance fc.300fb123ba76519c:b436362bae5b217-fc.300fb123ba76519c:b436362bae5b217-eui.387de1af35b93f6ff0a9beec00000001 | Select MetricId,Value,Unit,Instance | Sort-Object MetricId

Hope it was useful. Cheers!

Related posts

VMware PowerCLI 101 - Part4 - Snapshots

VMware PowerCLI 101 - Part3 - Basic VM operations

VMware PowerCLI 101 - Part2 - Working with vCenter server

VMware PowerCLI 101 - Part1 - Installing the module and working with stand-alone ESXi host

VMware PowerCLI 101 - Part4 - Snapshots

In this post, I will briefly explain how to make use of PowerCLI when working with virtual machine snapshots.

Take a snapshot of VM:
New-Snapshot -VM "New Virtual Machine" -Name snap1 -Description try1

Revert to a snapshot:
$snap = Get-Snapshot -VM "New Virtual Machine" -Name "snap1"
Set-VM -VM "New Virtual Machine" -Snapshot $snap -WhatIf
Set-VM -VM "New Virtual Machine" -Snapshot $snap 

Delete specific snapshot of a VM:
$snap = Get-Snapshot -VM "New Virtual Machine" -Name "snap1"
Remove-Snapshot -Snapshot $snap -WhatIf
Remove-Snapshot -Snapshot $snap 

Delete all snapshots of a VM:
Get-VM "New Virtual Machine" | Get-Snapshot | Remove-Snapshot -WhatIf
Get-VM "New Virtual Machine" | Get-Snapshot | Remove-Snapshot 

List all VMs with snapshots:
Get-VM | Get-Snapshot | Select-Object VM, Name, Description, SizeGB

List VMs with snapshots older than a week:
Get-VM | Get-Snapshot | Where {$PSItem.Created -lt (Get-Date).AddDays(-7)} | Select-Object VM, Name, Description, Created, SizeGB | Format-Table

Find the parent-child relationship of VM snapshots:
$vm = Get-VM "New Virtual Machine"
get-vm $vm | Get-Snapshot | Select VM,Name,Description,Parent,Children,SizeGB,IsCurrent,Created,Id | sort Created |  Format-Table

Hope it was useful. Cheers!

Related posts:

VMware PowerCLI 101 - Part3 - Basic VM operations

VMware PowerCLI 101 - Part2 - Working with vCenter server

VMware PowerCLI 101 - Part1 - Installing the module and working with stand-alone ESXi host

VMware PowerCLI 101 - Part3 - Basic VM operations

Previous posts of this blog series talked about how to install PowerCLI, connecting to ESXi host and basics of working with the vCenter server. In this article, we will go through basic VM operations.

Get basic VM details:
Get-VM -Name <name of the virtual machine>

To view all properties of a VM object:
Get-VM -Name <name of the virtual machine> | Get-Member

To start a VM:
Get-VM -Name <name of the virtual machine> | Start-VM

To restart a VM:
Get-VM -Name <name of the virtual machine> | Restart-VMGuest

To shut down a VM:
Get-VM -Name <name of the virtual machine> | Shutdown-VMGuest

To delete a VM permanently:
Get-VM -Name <name of the virtual machine> | Remove-VM -DeletePermanently

Let's have a look into the "ExtensionData" property of a virtual machine.

Status related details of a VM:
(Get-VM -Name <name of the virtual machine>).ExtensionData | select GuestHeartbeatStatus,OverallStatus,ConfigStatus

CPU, Memory config details of a VM:
(Get-VM -Name <name of the virtual machine>).ExtensionData.Config.Hardware

CPU, Memory hot add/ remove features:

Layout details of a VM:
(Get-VM -Name <name of the virtual machine>).ExtensionData.LayoutEx.File | sort Key | ft

VM tools status and other guest details:
(Get-VM -Name <name of the virtual machine>).ExtensionData.Guest

Network related info of a VM:

(Get-VM -Name <name of the virtual machine>).ExtensionData.Guest.Net

Hope this was useful. Cheers!

VMware PowerCLI 101 - Part1 - Installing the module and working with stand-alone ESXi host

This blog post series is for all those who would like to kickstart and learn VMware PowerCLI from the very basic level. Let's start with installing the PowerCLI module.

First, verify whether VMware.PowerCLI module is already installed on your machine.

Get-Module VMware.PowerCLI -ListAvailable

In this case, as shown above, VMware.PowerCLI module is not installed. Now let's find the latest version of the module available from PowerShell gallery.

Find-Module VMware.PowerCLI

11.2.0.12780525 is the latest version that is available in PSGallery.

To install this module use: Install-Module VMware.PowerCLI

Installation of this module may take a couple of minutes as this is the very first time. Once successfully installed you can verify using: Get-Module VMware.PowerCLI -ListAvailable

To list all the available cmdlets: Get-Command -Module VMware*

Now, let's go ahead and connect to an ESXi host.

Connect-VIServer <IP of ESXi server>

Provide the necessary credentials and once connected successfully you will see the below.

To get basic details of the ESXi host: Get-VMHost <IP of ESXi server>

To get more information about a cmdlet you can make use of the PowerShell Help System.

You can find all the properties and methods available for an object using: Get-Member

Example: Get-VMHost 192.168.105.1 | Get-Member

To retrieve specific properties of an ESXi host object: 

$h1 = Get-VMHost 192.168.105.1

Model detail: $h1.Model

Processor type: $h1.ProcessorType

Another very useful property is "ExtensionData". Let's have a detailed look at this property.

This property provides you a lot of info regarding system runtime, hardware health status, etc.

System and hardware health status:

Memory and CPU health status:

Configuration status: $h1.ExtensionData.ConfigStatus

Configuration issues: $h1.ExtensionData.ConfigIssue

Few more useful details that are available under "ExtensionData" are given below.

There is a property called "RebootRequired" which actually shows whether there is any pending reboot for the system.

System uptime and resource utilization are available under "QuickStats" property.

Note:
"OverallCpuUsage" is in MHz, "OverallMemoryUsage" is in MB and "Uptime" is in Seconds.

List of all system capabilities: $h1.ExtensionData.Capability

BIOS version: $h1.ExtensionData.Hardware.BiosInfo

In the next article, we will discuss connecting to the vCenter server using PowerCLI and performing day-to-day operations. Hope this was useful. Cheers!

Related posts:

VMware PowerCLI 101 - Part2

VMware PowerCLI 101 - Part3

PowerShell quick start guide

VMFS vs VVOL

Note: This blog has moved! New location vineethac.blogspot.com

Let's start with a quick comparison.

VMFS	VVOL
LUN centric approach Pre-provisioning of LUNs Use of multiple datastores for different performance capabilities Management difficulties as a single VM may span across multiple datastores	VM centric vSphere is now aware of array capabilities through VASA provider No pre-provisioning One VVOL datastore can represent the whole array Storage policies can be applied per vmdk level Some of the vSphere operations are offloaded to array using VAAI (full cloning, snapshots) VVOL snapshots are faster (different from traditional snapshots with redo logs)

Note: The explanations below regarding SAN is based on Dell EMC Unity (hybrid array) 

VMFS environment

A traditional VMFS datastore setup is given below. Say, you have two VMs. One with 3 virtual disks and the second one with 2 virtual disks. And your array has 4 storage pools with specific capabilities. Based on those capabilities the pools are classified into 4 service levels (Platinum, Gold, Silver and Bronze). In this case you need to provision 4 datastores/ LUNs from the respective pool to meet requirements of the two virtual machines.

VMFS

You can clearly see that the first VM is spanned across 3 datastores and the second VM is spanned across 2 datastores. If your environment has hundreds and thousands of VMs management becomes too complicated. In this case, as the datastores are properly named the vSphere admin can easily identify the service level/ capability of a specific datastore. But if naming convention is not followed, then vSphere admin has to contact the storage admin to know about the capabilities of that specific datastore/ LUN. Again lots of communication needed, making it a complex process!

VVOL environment

Now let’s have a look at the VVOL environment which is shown the figure below. You are having the same array, but instead of provisioning datastores/ LUNs from the respective pools, here we are creating one vvol datastore. The array has 4 storage pools, each having specific capabilities like drive type, RAID level, tiering policy, FAST Cache ON/ OFF etc. and are classified into 4 service levels as Platinum, Gold, Silver, and Bronze. So each pool has its own capability profile. You can provide any name, but here I just gave the same name as the service level of each pool.

Pool_01   -> Service level: Platinum         -> Capability profile: Platinum

Pool_02   -> Service level: Silver               -> Capability profile: Silver
Pool_03   -> Service level: Bronze            -> Capability profile: Bronze
Pool_04   -> Service level: Gold                -> Capability profile: Gold

Note: vvol datastores cannot be created without capability profile

Next steps are:

• Create vvol datastore in the SAN
• Provide a name for the vvol datastore
• Add capability profiles that need to be part of the vvol datastore
• In this case, all 4 capability profiles are part of the vvol datastore
• You can also limit the amount of space that will be used from each capability profile by the vvol datastore
• Once it’s done, vvol datastore is created in the SAN

VVOL

At this point, you can go ahead and configure host access to this vvol datastore. Now you have to let your Vsphere environment know about the capabilities of the storage array. That is done by registering the new storage provider on your vCenter server making use of VASA (VMware vStorage API for Storage Awareness) provider. Once registered the vSphere environment will communicate with the VASA provider through the array management interface (OOB network) which forms a control path. Next step is creating a vvol datastore on the ESXI host which you provided access earlier. For each vvol datastore created on the storage array, two protocol endpoints (PEs) will be automatically generated to communicate with an ESXI host forming a data path. If you create another vvol datastore on the array and provide access to same ESXI host, two more PEs will be created. PEs act like a target. And on the ESXI side, if you look at the storage devices, you can see 2 proxy LUNs which connects to the respective PEs.

Now you have to create VM storage policies based on service levels. Here you have 4 service levels, so you have to create 4 storage policies. Assign storage policy per vmdk basis as per requirements.

Eg: Storage_Policy_Gold -> VMDK 02 (second VM) -> it will be placed in Pool_04 automatically

So in this case, instead of having 4 VMFS datastores we needed only 1 VVOL datastore which has all the required capabilities. This means you don't need to provision more LUNs from the SAN. Storage management becomes easy with just one VVOL. There is more granularity with SPBM at each VMDK level. With VVOLs the SAN is aware of all the VMs and its corresponding files hosted on it. This makes space reclamation very easy and straight. The moment a VM or a VMDK is deleted, that space will be immediately made free as SAN is having the complete insight of virtual machines stored in it. Data mobility between different storage pools based on its service level becomes effortless as it is handled directly by the SAN internally based on SPBM. All together VVOL simplifies storage/ LUN management.

Hope it was useful. Cheers!

References:

Real time VMware VM resource monitoring using PowerShell

This post is about monitoring resource usage of a list of virtual machines hosted on VMware ESXi clusters using PowerCLI. Output format is given below which gets refreshed automatically every few seconds.

Prerequisites:

• VMware.PowerCLI module should be installed on the node from which you are running the script
• You can verify using: Get-Module -Name VMware.PowerCLI -ListAvailable
• If not installed, you can find the latest version from the PSGallery: Find-Module -Name VMware.PowerCLI
• Install the module: Install-Module -Name VMware.PowerCLI

Note:

• I am using PowerCLI Version 11.0.0.10380590

Latest version of the project and code available at: github.com/vineethac/vmware_vm_monitor

Sample screenshot of output:

Notes:

VMware guidance: CPU Ready time and Co-Stop values per core greater than 5% and 3% respectively could  be a performance concern.

Hope this will be useful for resource monitoring as well as right sizing of VMs. Cheers!

References:

• http://docs.hol.vmware.com/HOL-2012/HOL-INF-04_EN/HOL-INF-04-m1/lessons/Part_1_of_4__Performance_101_-_vSphere_Performance_Basics_-_CPU__C__.html
• http://virtualization.solutions/2018/02/04/performance-monitoring-cpu/

Real time VMware datastore performance monitoring using PowerShell

I had a scenario where we had to monitor the real time performance statistics of multiple shared VMFS datastores which are part of a multi-node VMware ESXi cluster. So this post is about the short script which uses VMware PowerCLI to get read/ write IOPS and latency details of these shared datastores across all nodes in the cluster. The output format is given below which gets refreshed automatically every few seconds.

Prerequisites:

• VMware.PowerCLI module should be installed on the node from which you are running the script
• You can verify using: Get-Module -Name VMware.PowerCLI -ListAvailable
• If not installed, you can find the latest version from the PSGallery: Find-Module -Name VMware.PowerCLI
• Install the module: Install-Module -Name VMware.PowerCLI

Note:

• I am using PowerCLI Version 11.0.0.10380590

Latest version of the project and code available at: github.com/vineethac/datastore_perfmon

Sample screenshot of output:

Hope it was useful. Cheers!

Reference:

https://www.rudimartinsen.com/2017/07/12/vsphere-performance-data-part-3-get-stat/

PowerCLI to remove orphaned VM from inventory

Note: This blog has moved! New location vineethac.blogspot.com

Recently I came across a situation where one of the VM running on ESXi 6.0 was orphaned. This happened after I updated the ESXi with a patch. All the files associated with that VM was available in the datastore. But the VM was displayed in the inventory as orphaned. There was no option available to remove the VM from inventory from the web console. Inorder to register the original VMX file, the orphaned VM needs to be removed from inventory first.

Steps to resolve this issue:

1. Connect to vCenter server using PowerCLI: Connect-VIServer 192.168.14.15
2. Get list of VMs: Get-VM | Select Name

3. In my case "HCIBench_1.6.5.1_14G" was orphaned.

4. Remove the orphaned VM: Remove-VM HCIBench_1.6.5.1_14G

5. As you can see in the above screenshot, orphaned VM is removed from inventory. Now you can go to the datastore where the original VM files are stored, click on the VMX file and register (In my case, while I tried to register the VM it resulted in an error mentioning that the item already exists. I had to reboot the vCenter server to fix this issue. After rebooting the vCenter I was able to register the VMX file of the VM).

Hope it was helpful to you. Cheers!

Reference: blog.vmtraining.net